Running analyses 51
Run methodRun method
Run methodRun method
Run method
Refer to Short-Form Reminder no. 6.
1. Select the method in the Method library.
2. Install the electrode then the reagent groups to be used to perform
the analysis.
3. Display the Main window.
4. Press 1 to start the analysis.
Run direct measurementRun direct measurement
Run direct measurementRun direct measurement
Run direct measurement
Refer to Short-Form Reminder no. 8.
1. Select the method.
2. Install the electrode group to be used to perform the measurement.
3. Prepare the sample solution and place on the sample stand.
4. Display the Electrodes window.
5. Press 5 to start the measurement.
6. Select the electrode in the list of connected electrodes. You can
stop or start stirring by pressing 1.
To Next Page
Loading...
Need help?
General
