10 Chapter 1
WW
WW
W
orking in Routine modeorking in Routine mode
orking in Routine modeorking in Routine mode
orking in Routine mode
In “ROUTINE” mode you are guided at every step, thanks to the clear-
text messages and the icons present on the large graphic display.
A Routine operator has access to all the displays for
checking
purposes.
Running methods
When working in “ROUTINE” mode, it is necessary to install your
titration system according to the selected method or sequence, prior to
running a method or sequence.
1. Select the method or sequence
Refer to chapter 4.
2. Check icons and run the method or sequence
Refer to page 8.
To Next Page
Loading...
