Programming guidelines 41
Edit reagent screenEdit reagent screen
Edit reagent screenEdit reagent screen
Edit reagent screen
1. Press 4 Reagent library.
2. Press ✓ and select the reagent to be edited from the list.
3. Press 2 Edit reagent.
4. Edit the necessary parameters.
a. Modify the units (mM, M, mN, N) indicated on the reagent bottle. Use
the following: mM = mmol/l, M = mol/l, mN = meq/l, N = eq/l or
mg/ml (Karl-Fischer reagents only).
b. Address:
Indicates the location of the burette containing the reagent:
. TIM/1 or TIM/2 (position 1 or 2 on the Titration Manager),
. ABU1/1 or ABU1/2 (position 1 or 2 of an ABU62 connected to the
Local socket of the Titration Manager),
To Next Page
Loading...
