Viewing data 55
1 1
Reagent calibration resultsReagent calibration results
Reagent calibration resultsReagent calibration results
Reagent calibration results
The last 100 reagent calibration results are saved in the archives.
Once you have selected the reagent then the result (see first page of this
chapter), the following data are displayed:
Results of the current
calibration
Mean and standard deviation cal-
culated on 4 tests performed and
accepted on the same standard.
28 is the
number
of results
saved for
the
selected
reagent.
Result no. 1 / 28 Result no. 2/ 28
Scroll the results.
The results can be: reagent titre entered by the operator, test performed
on a standard, mean calculated on several tests performed using the
same standard or the current calibration data. "TIM" (or "SAC") means
that a TIM (or SAC) method has been run.
To Next Page
Loading...
Need help?
General
