Programming guidelines 37
Edit electrode screenEdit electrode screen
Edit electrode screenEdit electrode screen
Edit electrode screen
1. Press 4 Electrode library.
2. Press ✓ and select the electrode to be edited from the list.
3. Press 2 Edit electrode.
a. Electrode address: indicates which socket the electrode is
connected to:
. TIM / E1, E2, Ref, Temp, GND or Pt-Pt (socket of the Titration
Manager),
. ABU1 / E1, E2, Ref, Temp, GND, Pt-Pt (socket of an ABU62
connected to the Local socket of the Titration Manager),
. ABU2 / E1, E2, Ref, Temp, GND, Pt-Pt (socket of an ABU62
connected to the Slave socket of another ABU62 connected to the
Local socket of the Titration Manager).
4. Edit the necessary parameters.
To Next Page
Loading...
