56 Chapter 5
1
Result no. 13 / 19
Result no. 14 / 19
1
Electrode calibration resultsElectrode calibration results
Electrode calibration resultsElectrode calibration results
Electrode calibration results
The last 100 electrode calibration results are saved in the archives.
Once you have selected the electrode then the result (see first page of
this chapter), the following data are displayed (for a pH calibration):
Mean calculated on 3 cycles
performed and accepted. Each
cycle has been run using 2 buffer
solutions.
Result of cycle no. 3 (cycle
accepted). This cycle has been
run using 2 buffer solutions.
19 is the
number of
results
saved for
the
selected
electrode.
Scroll the results.
The results can be: cycle performed on a standard, mean calculated on
several cycles performed on the same standard or current calibration
data. "TIM" (or "SAC") means that a TIM (or SAC) method has been run.
To Next Page
Loading...
Need help?
General
