RADWAG AS series - Beep Signal - Reaction on Pressing Key; Printout of All Balance Parameters through RS 232 Port

29
10.2. “Beep” signal – reaction on pressing key
bEEP OFF – signal of pressing key off
bEEP On - signal of pressing key on.
Return to weighing
(see - 7.1.2. – return to weighing).
10.3. Printout of all balance parameters through RS 232 port
After pressing F key, balance parameters will be send through RS 232 port.
Return to weighing
(see - 7.1.2. – return to weighing).