RADWAG AS series Operating Instruction

33
P1.4 ACAL – Automatic calibration (balances with internal calibration)
determination of factor, which should decide about starting the automatic internal
calibration
nonE – none of factors will cause start of calibration
tEmP – calibration with regard to change of temperature
timE – calibration with regard to time set in P1.5 CALt
both – calibration with regard to time and temperature.

RADWAG AS series Specifications

General

Display	LCD with backlight
Maximum Capacity	Varies by model
Readability	Varies by model
Pan Size	Varies by model
Calibration	Internal or external, depending on model
Stabilization Time	≤ 3 seconds
Interface	RS232, USB
Repeatability (Standard deviation)	Varies by model
Linearity	Varies by model
Net Weight	Varies by model
Protection Class	IP 43