ATTENTION:
For the fast and step mode the drying time in overdrive temperature (step
mode) or particular thresholds (fast mode) should be set. The time is counted
from the moment of reaching the temperature for the particular threshold.
(Use only when applicable).
FINISH MODE
Select and set finish mode parameters by pressing dedicated
soft key on moisture analyzer’s display.
After pressing, a new window is
opened for determining finish
mode. Select one of available finish
modes by pressing field with its
name.
A window for selecting type of
finish mode is opened.
Use navigating arrow keys to scroll
through available modes.
After selecting desired mode,
To Next Page
Loading...
