RADWAG PS Series Operating Instructions

14
6. KEYBOARD
Sw
itches the display off. ON/OFF key.
Function key. F key.
Selects the work mode. MODE key.
Changes measure units. UNITS key.
Sends information to external instrument (PRINT) or confirms
parameter value or function (ENTER). PRINT/ENTER Key.
Sets indication to zero. Esc/TARA Key.
Calibration (internal or external)
Menu of balances
Navigation bar

RADWAG PS Series Specifications

General

Category	Scales
Brand	RADWAG
Series	PS
Capacity	Varies by model
Readability	Varies by model
Pan Size	Varies by model
Display	LCD
Housing	Plastic
Repeatability	Varies by model
Linearity	Varies by model
Calibration	Internal or external
Interface	RS232
Power Supply	100 - 240V AC
Operating Temperature	+15 ÷ +30 °C
Weighing Unit	g, lb, oz