RADWAG PS Series Operating Instructions

37
11.3. Calibration test
11.3.1.
Balances with intern
al calibration
Internal calibration mass is compared to its value in the balance memory.
This process is automatic. Its result is shown on the display. Process
proceeds automatically and display indicates its result (if balance is
connected to computer or to printer through RS 232 joint, printout of
calibration test will take place). Press ESC/TARA key to return to previous
screen.
Procedure:
Return to weighing
The changes are recorded when the balance returns to weighing
mode with the recording the changes. Press the ESC many times.
Following question appears on the display.
Select one of the options : ENTER – record / ESC – cancel
(Return to weighing 7.1.2. Return to weighing).

RADWAG PS Series Specifications

General

Category	Scales
Brand	RADWAG
Series	PS
Capacity	Varies by model
Readability	Varies by model
Pan Size	Varies by model
Display	LCD
Housing	Plastic
Repeatability	Varies by model
Linearity	Varies by model
Calibration	Internal or external
Interface	RS232
Power Supply	100 - 240V AC
Operating Temperature	+15 ÷ +30 °C
Weighing Unit	g, lb, oz