RADWAG PS Series Operating Instructions

71
17. LIST OF ORDERS IN RADWAG BALANCES
Function TARA
Format T CR LF (setting to tare)
Function ZERO
Format Z CR LF (setting to zero)
Function PRINT
Format SI CR LF (sending results when stab)
Function PRINT
Format S CR LF (sending results now)
Function CONSTANCE WORK - equivalent for key conA on
Format C 1 CR LF (start continuous transmission off in basic interval)
Function MANUAL WORK - equivalent for order conA OFF
Format C 0 CR LF (To change work mode on manual printout)
Function CONSTANCE WORK - equivalent for key conb on
Format CU 1 CR LF (start continuous transmission off in actual interval)
Function MANUAL WORK - equivalent for order conb OFF
Format CU 0 CR LF (To change work mode on manual printout)
Function SEND THE RESULT IN ACTUAL INTERVAL
Command SU CR LF (result in actual unit is sent from the balance after
stability)
Function SEND RESULT IN ACTUAL INTERVAL IMMEDIATELY (result in
actual unit sending results now)
Command SUI CR LF
If command which is not included in the register or is an error and ends with CR LF
is sent to the balance the balance returns command E S CR LF.

RADWAG PS Series Specifications

General

Category	Scales
Brand	RADWAG
Series	PS
Capacity	Varies by model
Readability	Varies by model
Pan Size	Varies by model
Display	LCD
Housing	Plastic
Repeatability	Varies by model
Linearity	Varies by model
Calibration	Internal or external
Interface	RS232
Power Supply	100 - 240V AC
Operating Temperature	+15 ÷ +30 °C
Weighing Unit	g, lb, oz