RADWAG PS Series Operating Instructions

28
10. ANOTHER PARAMETERS
User can set parameters which have influence on work with balance. These
parameters are contained in P5 othEr e.g. backlight and „beep” signal.
Enter to P5 Others group of submenu according to point 6.1.
10.1. Backlight of weighing result
bl OFF
– backlight off
bl On – backlight on
bl Aut – If result of weighing doesn’t change for 10 seconds,
backlight will turn off automatically.
Return to weighing
(see - 7.1.2. – return to weighing).
ATTENTION:
If result of weighing doesn’t change for 10 seconds, backlight will turn off
automatically. Backlight is turned on when indication on display changes.

RADWAG PS Series Specifications

General

Category	Scales
Brand	RADWAG
Series	PS
Capacity	Varies by model
Readability	Varies by model
Pan Size	Varies by model
Display	LCD
Housing	Plastic
Repeatability	Varies by model
Linearity	Varies by model
Calibration	Internal or external
Interface	RS232
Power Supply	100 - 240V AC
Operating Temperature	+15 ÷ +30 °C
Weighing Unit	g, lb, oz