RADWAG PS Series Operating Instructions

57
13.5. Summing function
In sum procedure following components are added in order to make mixture. After
adding following component composition of the mixture is presented on the display.
During sum procedure masses of the components are sent to joint RS 232 (printout
on the printer or sending to computer application).
Procedure:
• Enter to function.

RADWAG PS Series Specifications

General

Category	Scales
Brand	RADWAG
Series	PS
Capacity	Varies by model
Readability	Varies by model
Pan Size	Varies by model
Display	LCD
Housing	Plastic
Repeatability	Varies by model
Linearity	Varies by model
Calibration	Internal or external
Interface	RS232
Power Supply	100 - 240V AC
Operating Temperature	+15 ÷ +30 °C
Weighing Unit	g, lb, oz