RADWAG PS Series - Choice of Weighing Unit (Temporary)

19
After choosing basic unit press ENTER/PRINT key. Chosen unit will stop
pulsing.
Possibilities of choice:
• For EC verified balances, user can choose following units: [g], [mg], [ct]
• For non-verified balances, user can choose following units: [g], [ct], [mg],
[oz], [ozt], [dwt], [t], [mom], [gn].
Go back to weighing mode with procedure of saving changes
(see point - 7.1.2. – return to weighing).
ATTENTION:
Balance after switching on will start with set basic unit.
8.2. Choice of weighing unit (temporary)
F
unction enables choice of unit with which mass on the pan will be indicated.
Unit will be valid until change of unit or switching on and off the balance. Each
pressing the Units key, causes change of measuring unit.
Possibilities of choice:
• For EC verified balances, user can choose following units: [g], [mg], [ct]
• For non-verified balances, user can choose following units: [g], [ct], [mg],
[oz], [ozt], [dwt], [t], [mom], [gn].