RADWAG PS Series Operating Instructions

38
11.3.2. Balances with external calibration
It consists in comparison of mass of standard with mass previously saved
in balance memory during the calibration. Process proceeds automatically
and display indicates its result (if balance is connected to computer or to
printer through RS 232 joint, printout of calibration test will take place).
Press ESC/TARA key to return to previous screen.
Procedure:
Return to weighing
(see - 7.1.2. – return to weighing).

RADWAG PS Series Specifications

General

Category	Scales
Brand	RADWAG
Series	PS
Capacity	Varies by model
Readability	Varies by model
Pan Size	Varies by model
Display	LCD
Housing	Plastic
Repeatability	Varies by model
Linearity	Varies by model
Calibration	Internal or external
Interface	RS232
Power Supply	100 - 240V AC
Operating Temperature	+15 ÷ +30 °C
Weighing Unit	g, lb, oz