55
From this moment display will not indicate mass of weighed load but deviation
of load mass placed on the pan referring mass of standard (in %).
Return to weighing
(see - 7.1.2. – return to weighing).
13.4. Defining thickness of solids and liquids
T
here is equipment to defining thickness of solids and liquids in additional
equipment. For user request RADWAG service can render special software to
determine thickness by balance accessible.
1. beaker support
2. frame of balance
3. plunger
4. beaker
5. thermometer clench
6. thermometer
7. plunger string
8. plunger hanger
9. upper balance
10. balance string
11. down pan
12. frame
To Next Page
Loading...
