QRAE II User Guide
Page 39
3. Press [MODE] to step to Save or Quit.
4. Press [Y/+] to commit your change or to exit to the next menu item.
Change Display Language. Scroll from English to other languages (language options
depend on firmware version).
1. Press [MODE] to step from Save to Quit to the up or down arrow.
2. Choose a language by pressing [Y/+].
3. Press [MODE] to step to Save or Quit.
4. Press [Y/+] to commit your change or to exit to the next menu item.
Set Temperature Unit. Select Fahrenheit or Celsius.
1. Press [MODE] to step from Save to Quit to the up or down arrow.
2. Choose Fahrenheit or Celsius by pressing [Y/+].
3. Press [MODE] to step to Save or Quit.
4. Press [Y/+] to commit your change or to exit to the next menu item.
Enable/Disable Run Silent. You can select Run Silent Enabled or Run Silent Disabled
modes.
1. Toggle enabled or disabled by pressing [Y/+].
2. Press [MODE] to save your choice and to exit to the next menu item.
Change Startup Mode. Options are Normal Startup and Fast Startup. Fast Startup skips
showing you many settings and is best suited to environments where the QRAE II is
turned on and off very often during a given day.
1. Press [MODE] to step from Save to Quit to the up or down arrow.
2. Choose Normal Startup or Fast Startup by pressing [Y/+].
3. Press [MODE] to step to Save or Quit.
4. Press [Y/+] to commit your change or to exit to the next menu item.
To Next Page
Loading...
Need help?
General
