Rae RAEGuard 2 PID - Programming Menus

RAEGuard 2 PID User’s Guide
23
9 Programming Menus
Programming allows anyone with the password to change the
instrument’s settings, calibrate the instrument, etc. Depending on
whether you use the Basic or Advanced Mode, both of which have
different passwords, you can access different menus and submenus.
This table shows the menus (and their icons) and submenus. Items
marked with an asterisk (*) are only available in Advanced Mode.
They are not available in Basic Mode.
Calibration
Measurement*
Alarm Setting
Monitor Setup
Zero/Fresh
Calibration
Meas. Unit*
High Alarm
Temp. Unit
Span Calibration
Meas. Range*
Low Alarm
Language
Set Span Value
Meas. Gas*
Ext. Alarm
Delay*
Pump Duty (%)*
Calibration Gas*
Pump Cycle(s)*
Pump Status*
Bus Baudrate
Analogout 4mA
Analogout 20mA
Unit ID
LCD Contrast
LCD Backlight
Change
Password*