Rae ToxiRAE Pro - Page 36

ToxiRAE Pro User’s Guide
34
Date
The Date is expressed as Month/Day/Year, with two digits for each (MM/DD/YY).
The left-most digit is highlighted to indicate it is selected when you enter the Date
submenu.
1. Press [Y/+] repeatedly to select a desired number. Numbers increase from 0 to 9.
Once 9 is reached, pressing [Y/+] again “wraps” around back to 0.
2. Press [MODE] to advance to the next digit.
Repeat this process until all six digits of the new date are entered.
3. Press [MODE] repeatedly until “OK” is highlighted.
4. Press [Y/+] to save your selection and advance to Time.
Note: If you do not want to save the change, press [MODE] repeatedly until
“Cancel” is highlighted. Press [Y/+] to exit to Time without saving the changes.
Time
The Time is expressed as Hours/Minutes/Seconds, with two digits for each. The time is in
24-hour (military) format of HH:MM:SS.
The left-most digit is highlighted to indicate it is selected.
1. Press [Y/+] repeatedly to select a desired number. Numbers increase from 0 to 9.
Once 9 is reached, pressing [Y/+] again “wraps” around back to 0.
2. Press [MODE] to advance to the next digit.
Repeat this process until all six digits of the new time are entered.
3. Press [MODE] repeatedly until “OK” is highlighted.
4. Press [Y/+] to save your selection, exit the Time submenu and advance to Temp.
Unit.
Note: If you do not want to save the change, press [MODE] until “Cancel” is
highlighted. Press [Y/+] to exit to Temp. Unit without saving the changes.