Need help?Do you have a question about the Raidon SR6600 Series and is the answer not in the manual?
Identifies components on the front panel of the SR6600 unit, including LCD, buttons, and LEDs.
Details the ports and connectors on the rear panel of the SR6600 unit, such as USB, LAN, and power inputs.
Provides step-by-step instructions for installing the SR6600 hardware, including drive insertion and connections.
How to log into the system using the device's LCD control panel and function buttons.
Guides on accessing the system via RS232 connection using VT100 terminal or Web GUI.
Instructions for accessing the system through the Web GUI using a LAN connection and IP address.
Overview of the system's structure and the rapid process for initial system configuration.
Explains how to create, delete, expand, activate, and manage RAID sets and hot spares.
Covers creating, deleting, modifying, checking, and stopping volume sets for storage management.
Details managing physical drives, including creating, modifying, deleting pass-through disks, and identifying devices.
Guides on configuring system parameters like network, alerts, SNMP, NTP, password, and firmware updates.
Provides access to system information, RAID hierarchy, and hardware monitoring status.
Addresses common user queries regarding firmware updates and password reset procedures.
Specific instructions for configuring volumes larger than 2.2TB using the GUI.
Step-by-step guide for updating the SR6600 series firmware via RS232 cable or LAN connection.
To Next Page
General
