Raise3D Pro3 HS Series - Page 33

Raise3D Pro3 HS Series Printer User Manual Run the Offset Calibration
30
3. If there is no gap between the color blocks, it means that the XYZ direction offset value of
the right nozzle is within a reasonable range. Please click "Done" to complete the 5-step
Offset Calibration.
4. If there is a gap between the color blocks, please click "Retry" and re-run the 4th and 5th
steps of the 5-step Offset Calibration to recalibrate the XY offset value of the right nozzle.