Raise3D Pro3 HS Series Printer User Manual Safety Signs
6
Safety Signs
Hot Surface: The hot surface sign indicates the presence of devices with high
temperatures. Always be extremely careful when working around heated components.
Wait half an hour after switching off the printer before handling parts to prevent burns.
Moving Parts: Do not put fingers, clothing or hair into gears and other hazardous parts to
avoid electric shock, injury, fire, or damage to the device.
High Voltage: The high voltage sign indicates the presence of high voltages. Always stay
away from exposed circuitry. It is recommended that all conductors be removed.
Replacement fuse identification and rating markings: Identification of a suitable
replacement fuse shall be marked adjacent to the fuse holder.
Protective Earthing Conductor Terminal: Marked near the protective earthing conductor
terminal.
To Next Page
Loading...
