Raise3D Pro3 HS Series - Page 4

Raise3D Pro3 HS Series Printer User Manual
1
Liability Statement
The information in this manual is subject to change without notice. Shanghai Fusion Tech Co.
Ltd. (also referred to as "Raise3D" here) is not responsible for errors in this manual. Raise3D
does not take any responsibility for incidental or secondary losses caused by the supply,
performance or use of this manual. Raise3D does not make any guarantees for this manual,
including but not limited to implied guarantees for marketability and suitability for specific
purposes. The system owner/material purchaser is responsible for determining whether the
Raise3D material is safe, legal, and technically suitable for the intended application, and at the
same time determining the appropriate disposal (or recycling) method in compliance with local
environmental regulations. Unless Raise3D's standard sales conditions are stipulated, Raise3D
will not be liable for any losses caused by the use of the products described in this manual. The
system owner/material purchaser is responsible for determining whether the materials used
meet the requirements of Raise3D, otherwise Raise3D will not be responsible for any losses
caused by the use of the products described in this manual.
Copyright Statement
This document is protected by copyright and all rights are reserved. The use, disclosure and
possession of this document are restricted by the software copyright and the agreement
established by Raise3D. Nothing in this document may be photocopied, reproduced, or
translated into another language, unless prior written permission from Shanghai Fusion Tech
Co. Ltd. is obtained.
All drawings and information in this manual are the property of Shanghai Fusion Tech Co. Ltd.
All unauthorized use and copying are prohibited.
Trademark Property Statement
Raise3D and ideaMaker are registered trademarks of Shanghai Fusion Tech Co. Ltd.
WINDOWS is registered trademark of Microsoft Corporation.
macOS is a registered trademark of Apple Inc.
All other product names and trademarks are the property of their respective owners, and
Raise3D is not responsible for the selection, performance or use of these non-Raise3D
products. Product specifications are subject to change without notice.