Raise3D Pro3 HS Series - Page 43

Raise3D Pro3 HS Series Printer User Manual Dual Extruder Printing
40
Acceleration judgment includes Printing Acceleration, Inner Shell Acceleration and Outer
Shell Acceleration, as shown in the red box below.
Volumetric flow rate calculation formula: Volumetric Speed = Layer Height * Extrusion Width
* Speed
The volumetric flow rate is determined by the Layer Height, Extrusion Width, and Speed.
Volumetric flow rate judgment includes Default Printing Speed, Inner Shell Speed and Outer
Shell Speed, as shown in the red box below.