106 GETTING TO KNOW YOUR INSTRUMENT PANEL
For Screen Setup:
OK button allows user to enter menu and
submenus.
Within each submenu layer, the up and
down arrow buttons will allow the user to
select the item of interest.
Pushing the OK button makes the selection and
a confirmation screen will appear (returning the
user to the first page of the submenu).
Pushing the left arrow button will exit each
submenu layer and return to the main menu.
OIL LIFE RESET
Your vehicle is equipped with an engine oil change
indicator system. The “Oil Change Required”
message will display in the instrument cluster
display for five seconds after a single chime has
sounded, to indicate the next scheduled oil change
interval. The engine oil change indicator system is
duty cycle based, which means the engine oil
change interval may fluctuate, dependent upon
your personal driving style.
Unless reset, this message will continue to display
each
time you place the ignition in the ON/RUN
position. To turn off the message temporarily, push
and release the OK or arrow buttons. To reset the
oil change indicator system (after performing the
scheduled maintenance), refer to the following
procedure:
1. Without pressing the brake pedal, push the
ENG
INE START/STOP button and place the
ignition in the ON/RUN position (do not start
the engine).
2. Push and release the down
arrow button to
scroll downward through the main menu to
“
V
e
h
icle Info.”
3. Push and release the rig
ht arrow button to
access the ”Oil Life” screen.
4. P
ush and hold the OK b
utton to reset oil life. If
conditions are met, the gauge and numeric
display will update to show 100%. If conditions
are not met a pop up message of “To reset oil
life engine must be off with ignition in run” will
be displayed (for five seconds), and the user
will remain at the Oil Life screen.
5. Push and release the up
or down ar row
button to exit the submenu screen.
NOTE:
If the indicator message illuminates when you start
the
vehicle, the oil change indicator system did not
reset. If necessary, repeat this procedure.
DISPLAY MENU ITEMS
Push and release the up or down ar row
button until the desired selectable menu icon is
high
lighted in the instrument cluster display.
Speedometer
Push and release the up or down ar row
button until the speedometer menu item is
h
i
g
h
lighted in the instrument cluster display. Push
and release the OK button to cycle the display
between mph and km/h.
Vehicle Info
Push and release the up or down ar row
button until the Vehicle Info menu icon is displayed
i
n
t
he instrument cluster display. Push and release
the left or right arrow button to scroll
th
rough the information submenus and push and
r
e
l
e
ase the OK button to select or reset the
resettable submenus.
Tire Pressure Monitor System
Air Suspension — If Equipped
Coolant Temperature — If Equipped
Trans Temperature (Automatic only)
Oil Temperature
Oil Pressure — If Equipped
To Next Page
Loading...
