32 GETTING TO KNOW YOUR VEHICLE
PROGRAMMING THE MEMORY FEATURE
To create a new memory profile, perform the
following:
NOTE:
Saving a new memory profile will erase the
sele
cted profile from memory.
1. Place the vehicle’s ignition in the ON/RUN
pos
ition (do not start the engine).
2. Adjust all memory profile settings to desired
pre
ferences (i.e., driver’s seat, outside mirrors,
adjustable pedals (if equipped), and radio
station presets).
3. Push the set (S) button on the memory switch,
and
then push the desired memory button (1
or 2) within five seconds. The instrument
cluster display will display which memory
position has been set.
NOTE:
Memory profiles can be set without the vehicle in
PARK
, but the vehicle must be in PARK to recall a
memory profile.
LINKING AND UNLINKING THE KEY FOB
T
O MEMORY
Your key fob can be programmed to recall one of
two saved memory profiles.
NOTE:
Before programming your key fob you must select
the
“Personal Settings Linked to Key Fob” feature
through the Uconnect system
Ú page 216.
To program your key fob, perform the following:
1. P
lace the vehicle’s ignition in the OFF
pos
ition.
2. Select a desired memory profile 1 or 2.
3. O
nce the profile has been recalled, push and
rel
ease the set (S) button on the memory
switch.
4. Push and release button (1) or (2) accordingly.
“Me
mory Profile Set” (1 or 2) will display in the
instrument cluster.
5. Push and release the lock button on the key
fob
within 10 seconds.
NOTE:
Your key fob can be unlinked from your memory
sett
ings by pushing the set (S) button, followed by
pushing the unlock button on the key fob within 10
seconds.
MEMORY POSITION RECALL
NOTE:
If a recall is attempted when the vehicle is not in
PARK
, a message will display in the instrument
cluster display.
To recall the memory settings for driver one or two,
push
the desired memory button number (1 or 2)
or the unlock button on the key fob linked to the
desired memory position.
A recall can be canceled by pushing any of the
memor
y buttons (S, 1, or 2) during a recall. When
a recall is canceled, the driver seat will stop
moving. A delay of one second will occur before
another recall can be selected.
To Next Page
Loading...
