TECHNICAL SPECIFICATIONS 441
CHASSIS FLUIDS AND LUBRICANTS
Do not use water alone or alcohol-based engine coolant (antifreeze) products. Do not use additional rust inhibitors or antirust products, as they may not be
compatible with the radiator engine coolant and may plug the radiator.
This vehicle has not been designed for use with propylene glycol-based engine coolant (antifreeze). Use of propylene glycol-based engine coolant (antifreeze)
is not recommended.
Component Fluid, Lubricant, or Genuine Part
Automatic Transmission
Use only Mopar® ZF 8 & 9 Speed ATF Automatic Transmission Fluid, or
e
q
u
i
valent. Failure to use the correct fluid may affect the function or
performance of your transmission.
Transfer Case – 48-11 Active On-Demand 2–speed Transfer Case (With 4WD
AUTO
)
We recommend you use Mobil Fluid LT.
Transfer Case – 48-12 Part Time 2–Speed Transfer Case (Without 4WD AUTO) We recommend you use Shell Spirax S2 ATF A389.
Front Axle We recommend you use Mopar® GL-5 Synthetic Axle Lubricant SAE 75W-85.
Rear Axle (3.21/3.55)
We recommend you use Mopar® Synthetic Gear Lubricant SAE 75W-90
(
MS-
A0160). Limited-Slip Rear Axles require the addition of 5 oz. (148 ml)
Mopar
® Limited Slip Additive (MS-10111).
Rear Axle (3.92)
We recommend you use Mopar® Synthetic Gear Lubricant SAE 75W-140
(
MS-
8985). Limited-Slip Rear Axles require the addition of 5 oz. (148 ml)
Mopar
® Limited Slip Additive (MS-10111).
Max Tow Rear Axle (3.92) We recommend You Use Dana SAE 80W90 Axle Lubricant.
Brake Master Cylinder We recommend you use Mopar® DOT 3 Brake Fluid, SAE J1709.
CAUTION!
9
To Next Page
Loading...
