SAFETY 337
3. Pass the tether strap hook through the space
between the head restraint and the seat back
behind the child seat, through the tether strap
loop behind the seat and over to the center
tether strap loop.
Tether Strap Through Outboard Tether Strap Loop
4. Attach the hook to the center tether strap loop
(se
e diagram). Tighten the tether strap
according to the child seat manufacturer’s
instructions.
Tether Strap Through Outboard Tether Strap Loop And
Atta
ched To Center Tether Strap Loop
NOTE:
If there are child seats in both of the outboard (left
and
right) seating positions, the tether strap hooks
of both child seats should be connected to the
center tether strap loop. This is the correct way to
tether two outboard child seats.
Center Seat:
1. R
each between the rear seat and rear glass
to
access the tether strap loop.
Center Tether Strap Loop Location
2. Place a child restraint on the seat and adjust
the
tether strap so that it will reach over the
seat back and headrest, through the tether
strap loop behind the seat and over to the
tether strap loop behind either the right or left
outboard seat.
6
To Next Page
Loading...
