TECHNICAL SPECIFICATIONS 439
Component Fluid, Lubricant, or Genuine Part
Diesel Engine Coolant
We recommend you use Mopar® Antifreeze/Coolant 10 Year/150,000 Mile
(240
,000 km) Formula OAT (Organic Additive Technology).
Engine Oil — 3.0L Turbo Diesel Engine
We recommend you use 5W-40 synt
hetic engine oil such as Mopar® that
meets the manufacturer Material Standard MS-12991 and the API SN engine
oil category is required.
Diesel Engine Oil Filter
We recommend you use Mopar® engine oil filters. Usin
g an oil filter that does
not meet the manufacturer’s filtration requirements can severely impact
engine life and reliability.
Fuel Filters — 3.0L Turbo Diesel Engine
We recommend you use Mopar® fuel filter. Must meet 3 micron rating. Usin
g
a fuel filter that does not meet the manufacturer’s filtration and water sepa-
rating requirements can severely impact fuel system life and reliability.
Und
er
normal conditions the diesel fuel filter should be replaced every
20,000 miles (32,000 km) (every other oil change). If the vehicle is being
u
sed
in severe operating conditions, or In certain geographical areas of the
country (Pennsylvania, New York, Ohio, Maryland, West Virginia, Arkansas,
Oklahoma, Kansas, Iowa, Missouri and Nebraska) due to fuel cleanliness
issues, it’s recommended to replace the fuel filter every 10,000
miles
(16,000 km).
9
To Next Page
Loading...
