R&S ESU Series - Page 270

Operating Manual 1302.6163.12 - 03 4.239
R&S ESU Instrument Functions
Analyzer Mode
LIST EVAL
(ON OFF)
Activates or deactivates the list evaluation.
A peak search evaluation is performed automatically during the measurement. The
results are displayed in a table below the measurement diagram.
By default, the list evaluation is active.
The evaluation table shows the following results:
• frequency range
• frequency of the absolute peak power in the corresponding range.
• frequency of the peak power in the corresponding range.
• difference between the limit line and the current power level in dB.
• result of the limit check (color and an asterisk indicate a failed limit check).
The trace, limit line, result of the limit check and the channel power of the reference
range are displayed in full screen, too, if the LIST EVALUATION is inactive.
Remote command: CALC:ESP:PSE:AUTO ON
MARGIN Opens an edit dialog box to enter the margin used for the limit check/peak search.
LOAD
STANDARD
Opens a dialog box to select a customized standard in the *.xml file format. Refer to
the description of “Provided XML Files for the Spectrum Emission Mask Measure-
ment” on page 4.223 and “Format Description of Spectrum Emission Mask XML
files” on page 4.228 for more information on provided standards and customizing
standards.
RESTORE
STANDARDS
Restores the original *.xml files that came with the R&S ESU. Note that files of the
same name are overwritten.