Operating Manual 1302.6163.12 - 03 4.255
R&S ESU Instrument Functions
Basic Settings
DEFAULT
CONFIG
The DEFAULT CONFIG softkey activates the preset settings of the PARAMETER
COUPLING table.
Remote command: --
ENABLE ALL
ITEMS
The ENABLE ALL ITEMS softkey switches all of the possible couplings to on. The
coupling of center frequency is switched on, therefore coupling of start /stop fre-
quency is switched off.
Remote command: --
DISABLE ALL
ITEMS
The DISABLE ALL ITEMS softkey switches all of the possible couplings to off.
Remote command: --
Minimum Attenuation INST:COUP:PROT ALL
Preamp INST:COUP:GAIN ALL
Preselector INST:COUP:PRES ALL
Demodulator INST:COUP:DEM ALL
Bandwidth INST:COUP:BWID ALL
To Next Page
Loading...
