R&S ESU Series - Page 311

R&S ESU Instrument Functions
Basic Settings
4.280 Operating Manual 1302.6163.12 - 03
GPIB
LANGUAGE
The GPIB LANGUAGE softkey opens a list of selectable remote-control languages:
•SCPI
•71100C
• 71200C
• 71209A
• 8560E
• 8561E
• 8562E
• 8563E
• 8564E
• 8565E
• 8566A
• 8566B
• 8568A
• 8568A_DC
• 8568B
• 8568B_DC
• 8591E
• 8594E
On switching between remote-control languages, the following settings or changes
will be made:
SCPI:
➢ The instrument will perform a PRESET.
8566A/B, 8568A/B, 8594E:
➢ The instrument will perform a PRESET.
For 8566A/B, 8568A/B and 8594E, command sets A and B are available. Com-
mand sets A and B differ in the rules regarding the command structure from the
command structure of “SCPI”. Therefore, correct recognition of SCPI commands is
not ensured in these operating modes.
Selecting a language different from "SCPI" will set the GPIB address to 18 if it was
20 before.
Start / stop frequency, reference level and # of sweep points will be adapted to the
selected instrument model.
8568A_DC and 8568B_DC are using DC input coupling as default if it is supported
by the instrument.
The HP model 8591E is compatible to HP model 8594E, the HP models 71100C,
71200C, and 71209A are compatible to HP models 8566A/B.