R&S ESU Remote Control – Description of Commands
DISPlay Subsystem
6.106 Operating Manual 1302.6163.12 - 03
Parameter: hue = TINT
sat = SATURATION
lum = BRIGHTNESS
The value range is 0 to 1 for all parameters.
Example: "DISP:CMAP2:HSL 0.3,0.8,1.0"
'Changes the grid color.
Characteristics: *RST value: --
SCPI: conform
Mode: R, A
The values set are not changed by *RST.
DISPlay:CMAP<1...34>:PDEFined BLACk | BLUE | BROWn | GREen | CYAN | RED | MAGenta |
YELLow | WHITe | DGRAy | LGRAy | LBLUe | LGREen | LCYan | LRED | LMAGenta
This command defines the color table of the instrument using predefined color values. Each numeric
suffix of CMAP is assigned one or several graphical elements which can be modified by varying the
corresponding color setting.
The same assignment as for DISPlay:CMAP<1 to 26>:HSL applies.
Example: "DISP:CMAP2:PDEF GRE"
Characteristics: *RST value: --
SCPI: conform
Mode: R, A
The values set are not changed by *RST.
CMAP17 Table selected field text
CMAP18 Table selected field background
CMAP19 Table + data entry field opaque title bar
CMAP20 Data entry field opaque text
CMAP21 Data entry field opaque background
CMAP22 3D shade bright part
CMAP23 3D shade dark part
CMAP24 Softkey state on
CMAP25 Softkey state data entry
CMAP26 Logo
CMAP27 Bar graph PK+
CMAP28 Bar graph PK-
CMAP29 Bar graph QPK
CMAP30 Bar graph AVER
CMAP31 Bar graph RMS
CMAP32 Final Meas
CMAP33 Bar graph CACV
CMAP34 Bar graph CRMS
To Next Page
Loading...
