R&S ESU Remote Control – Description of Commands
HCOPy Subsystem
6.116 Operating Manual 1302.6163.12 - 03
Parameter: hue = tint
sat = saturation
lum = brightness
The value range is 0 to 1 for all parameters
Example: "HCOP:CMAP2:HSL 0.3,0.8,1.0"
'Changes the grid color.
Characteristics: *RST value: --
SCPI: conform
Mode: R, A
The values set are not changed by *RST.
HCOPy:CMAP<1...34>:PDEFined BLACk | BLUE | BROWn | GREen | CYAN | RED | MAGenta |
YELLow | WHITe | DGRAy | LGRAy | LBLUe | LGREen | LCYan | LRED | LMAGenta
This command defines the color table in USER DEFINED COLORS using predefined color values. To
each numeric suffix of CMAP is assigned one or several picture elements which can be modified by
varying the corresponding color setting. The same assignment as for :HCPOy:CMAP<1 to 26>:HSL
applies
Example: "HCOP:CMAP2:PDEF GRE"
Characteristics: *RST value: --
SCPI: conform
Mode: R, A
The values set are not changed by *RST.
CMAP15 Table + softkey background
CMAP16 Table + softkey text
CMAP17 Table selected field text
CMAP18 Table selected field background
CMAP19 Table + data entry field opaque title bar
CMAP20 Data entry field opaque text
CMAP21 Data entry field opaque background
CMAP22 3D shade bright part
CMAP23 3D shade dark part
CMAP24 Softkey state on
CMAP25 Softkey state data entry
CMAP26 Logo
CMAP27 Bar graph PK+
CMAP28 Bar graph PK-
CMAP29 Bar graph QPK
CMAP30 Bar graph AVER
CMAP31 Bar graph RMS
CMAP32 Final Meas
CMAP33 Bar graph CAV
CMAP34 Bar graph CRMS
To Next Page
Loading...
