R&S ESU Series - Page 648

Operating Manual 1302.6163.12 - 03 6.209
R&S ESU Remote Control – Description of Commands
SENSe Subsystem
[SENSe<1|2>:]ROSCillator[:INTernal]:TUNE:SAVE
This command saves the new value for the tuning of the internal reference oscillator. The factory-set
value in the EEPROM is overwritten.
This command is only available at service level 1.
Example: "ROSC:TUN:SAV"
Characteristics: *RST value: –
SCPI: device-specific
Mode: R, A