Operating Manual 1302.6163.12 - 03 4.39
R&S ESU Instrument Functions
Receiver Mode
PEAK
SEARCH
The PEAK SEARCH softkey starts the determination of the subrange maxima list
from the available scan results. The procedure can be repeated as often as desired
to try out different settings of margin and number of subranges.
Remote command: :CALC:PEAK
The following table shows the peak list which is determined by the peak search func-
tion after the prescan:
EDIT PEAK
LIST
The EDIT PEAK LIST softkey calls the EDIT PEAK LIST submenu used for editing
the peak list. A frequency list can thus be predefined and a final measurement car-
ried out at these frequencies.
A peak list can also be generated by adopting the marker values (see section
“Change of Settings via Markers – MKR-> Key” on page 4.65)
Trace1: 014QP
EDIT PEAK LIST (Prescan results)
FREQUENCY
LEVEL dBpT
1 Average
2 Average
1 Max Peak
2 Average
1 Max Peak
2 Average
1 Max Peak
2 Average
1 Max Peak
2 Average
1 Max Peak
2 Average
2 Average
2 Average
2 Average
1 Max Peak
2 Average
1 Max Peak
2 Average
2 Average
TRACE3: ---
Trace2: 014AV
DELTA LIMIT dB
80.0000 MHz
89.4800 MHz
98.5200 MHz
98.5200 MHz
100.7200 MHz
102.3200 MHz
113.2400 MHz
116.9200 MHz
125.8800 MHz
125.8800 MHz
138.4800 MHz
138.4800 MHz
144.0400 MHz
167.0400 MHz
176.2400 MHz
200.4800 MHz
200.4800 MHz
210.2800 MHz
226.5600 MHz
239.0000 MHz
35.34
38.83
47.53
46.63
54.14
50.89
49.68
44.81
55.01
53.55
45.68
42.17
43.72
44.77
45.52
52.49
48.76
60.55
59.02
48.59
-3.91
-0.91
-2.63
6.47
3.88
10.56
-1.08
3.91
3.78
12.33
-5.95
0.53
1.90
2.32
2.83
-0.75
5.51
7.09
15.24
4.75
TRACE
EDIT FREQUENCY
INSERT
DELETE
SORT BY
FREQUENCY
SORT BY DELTALIMIT
ASCII FILE EXPORT
DECIM SEP
PAGE UP
PAGE DOWN
To Next Page
Loading...
