R&S ESU Series - Page 723

R&S ESU Remote Control – Description of Commands
GPIB Commands of HP Models 856xE, 8566A/B, 8568A/B and 8594E
6.284 Operating Manual 1302.6163.12 - 03
6.23.4.4 Commands for Spurious
Command Supported subset Function Corresponding
HP-Models
Status
SP_TIME Calculates an estimated time for
the spurious search
HP 856xE available in V4.1x and
above
SP_GEN Executes the spurious search HP 856xE available in V4.1x and
above
SP_SR_FL Lower search mimit in Hz HP 856xE available in V4.1x and
above
SP_SR_FU Upper search limit in Hz HP 856xE available in V4.1x and
above
SP_DBCFLG Values in dBm (SP_DBCFLG=0)
or
dBc (SP_DBCFLG=1)
HP 856xE available in V4.1x and
above
SP_SR_TH Lower search amplitude limit in
dBm or dBc
HP 856xE available in V4.1x and
above
SP_SR_TG Upper search amplitude limit in
dBm or dBc
HP 856xE available in V4.1x and
above
SP_SRTFLG Sort flag, 0=sort output by
frequencies, 1=sort output by
amplitudes
HP 856xE available in V4.1x and
above
SP_SR_TM Estimated search time in
seconds
HP 856xE available in V4.1x and
above
SP_NUMSP Number of spurious found HP 856xE available in V4.1x and
above
SP_SR_F[1..50] Array of frequencies in Hz for
spurious signals found
HP 856xE available in V4.1x and
above
SP_SR_A[1..50] Array of amlplitudes of the
spurious signals found in dBm or
dBc
HP 856xE available in V4.1x and
above
SP_SR_CF Reference frequency in Hz for
dBc mode
HP 856xE available in V4.1x and
above
SP_SR_CP Reference amplitude in dBm for
dBc mode
HP 856xE available in V4.1x and
above