R&S ESU Series - Page 729

R&S ESU Remote Control – Description of Commands
Differences in GPIB Behavior between the FSP and the FSE Families of Instruments
6.290 Operating Manual 1302.6163.12 - 03
R&S
ESU
FSE *TRG R&S ESU starts
measurement in active
screen
FSE: starts
measurement in both
screens (split screen
mode)
R&S
ESU
FSE *TST?
R&S
ESU
FSE *WAI
R&S
ESU
FSE ABORt
R&S
ESU
CALCulate:STATistics:APD[:STATe] ON | OFF new function for
R&S ESU
R&S
ESU
CALCulate:STATistics:CCDF[:STATe] ON | OFF new function for
R&S ESU
R&S
ESU
CALCulate:STATistics:NSAMples 100 to 1E9 new function for
R&S ESU
R&S
ESU
CALCulate:STATistics:PRESet new function for
R&S ESU
R&S
ESU
CALCulate:STATistics:Result<1...3>? MEAN | PEAK | CFACtor
| ALL
new function for
R&S ESU
R&S
ESU
CALCulate:STATistics:SCALe:AUTO ONCE new function for
R&S ESU
R&S
ESU
CALCulate:STATistics:X:RANGe -10dB to 200dB new function for
R&S ESU
R&S
ESU
CALCulate:STATistics:X:RLEVel -130dBm to 30dBm new function for
R&S ESU
R&S
ESU
CALCulate:STATistics:Y:LOWer -1E-9 to 0.1 new function for
R&S ESU
R&S
ESU
CALCulate:STATistics:Y:UPPer -1E-8 to 1.0 new function for
R&S ESU
FSE CALCulate<1|2>:CTHReshold MIN to MAX not available in
R&S ESU
FSE CALCulate<1|2>:CTHReshold:STATe ON | OFF not available in
R&S ESU
R&S
ESU
CALCulate<1|2>:DELTamarker<1...4>:AOFF markers 2...4 are either
normal or delta markers;
marker 1 always serves
as the reference marker
for all deltamarkers
FSE CALCulate<1|2>:DELTamarker<1...4>:AOFF there are 4markers and
4 deltamarkers; the most
recently used marker
serves as the reference
marker for all
deltamarkers
Devices Command (Sheet 2 of 47) Parameter Notes