R&S ESU Series - Page 730

Operating Manual 1302.6163.12 - 03 6.291
R&S ESU Remote Control – Description of Commands
Differences in GPIB Behavior between the FSP and the FSE Families of Instruments
R&S
ESU
FSE CALCulate<1|2>:DELTamarker<1...4>:FUNCtion:
FIXed:RPOint:X
<numeric_value> R&S ESU: marker 1 can
be moved independently
from the reference point
FSE: the marker and the
reference point are
linked to each other
R&S
ESU
FSE CALCulate<1|2>:DELTamarker<1...4>:FUNCtion:
FIXed:RPOint:Y
<numeric_value> R&S ESU: marker 1 can
be moved independently
from the reference point;
FSE: the marker and the
reference point are
linked to each other
R&S
ESU
FSE CALCulate<1|2>:DELTamarker<1...4>:FUNCtion:
FIXed:RPOint:Y: OFFSet
<numeric_value>
R&S
ESU
CALCulate<1|2>:DELTamarker<1...4>:FUNCtion:
FIXed:RPOint:MAX: PEAK
new function for
R&S ESU
R&S
ESU
FSE CALCulate<1|2>:DELTamarker<1...4>:FUNCtion:
FIXed[:STATe]
ON | OFF
R&S
ESU
FSE CALCulate<1|2>:DELTamarker<1...4>:FUNCtion:
PNOise:RESult?
R&S
ESU
FSE CALCulate<1|2>:DELTamarker<1...4>:FUNCtion:
PNOise[:STATe]
ON | OFF
FSE CALCulate<1|2>:DELTamarker<1...4>:MAXimum:
APEak
not available for
R&S ESU
R&S
ESU
FSE CALCulate<1|2>:DELTamarker<1...4>:MAXimum:
LEFT
R&S
ESU
FSE CALCulate<1|2>:DELTamarker<1...4>:MAXimum:
NEXT
R&S
ESU
FSE CALCulate<1|2>:DELTamarker<1...4>:MAXimum:
RIGHt
R&S
ESU
FSE CALCulate<1|2>:DELTamarker<1...4>:MAXimum[:
PEAK]
R&S
ESU
FSE CALCulate<1|2>:DELTamarker<1...4>:MINimum:
LEFT
R&S
ESU
FSE CALCulate<1|2>:DELTamarker<1...4>:MINimum:
NEXT
R&S
ESU
FSE CALCulate<1|2>:DELTamarker<1...4>:MINimum:
RIGHt
R&S
ESU
FSE CALCulate<1|2>:DELTamarker<1...4>:MINimum[:
PEAK]
R&S
ESU
FSE CALCulate<1|2>:DELTamarker<1...4>:MODE ABSolute | RELative
FSE CALCulate<1|2>:DELTamarker<1...4>:STEP:
AUTO
ON | OFF not available for
R&S ESU
FSE CALCulate<1|2>:DELTamarker<1...4>:STEP[:
INCRement]
<numeric_value> not available for
R&S ESU
Devices Command (Sheet 3 of 47) Parameter Notes