R&S ESU Series - Page 732

Operating Manual 1302.6163.12 - 03 6.293
R&S ESU Remote Control – Description of Commands
Differences in GPIB Behavior between the FSP and the FSE Families of Instruments
R&S
ESU
CALCulate<1|2>:LIMit<1...8>:ACPower:
ACHannel:ABSolute
-200 to 200 DBM,
-200 to 200 DBM
new function for
R&S ESU
R&S
ESU
CALCulate<1|2>:LIMit<1...8>:ACPower:
ACHannel:ABSolute:STATe
ON | OFF new function for
R&S ESU
R&S
ESU
FSE CALCulate<1|2>:LIMit<1...8>:ACPower:
ACHannel:RESult?
FSE CALCulate<1|2>:LIMit<1...8>:ACPower:
ACHannel:STATe
ON | OFF compatible to
CALCulate<1|2>:
LIMit<1...8>:ACPower:
ACHannel[:RELative]:
STATe of R&S ESU
not available for FSET
R&S
ESU
CALCulate<1|2>:LIMit<1...8>:ACPower:
ACHannel[:RELative]
0 to 100 DB,
0 to 100 DB
compatible to
CALCulate<1|2>:
LIMit<1...8>:ACPower:
ACHannel of FSE
R&S
ESU
CALCulate<1|2>:LIMit<1...8>:ACPower:
ACHannel[:RELative]:STATe
ON | OFF compatible to
CALCulate<1|2>:
LIMit<1...8>:ACPower:
ACHannel:STATe of FSE
FSE CALCulate<1|2>:LIMit<1...8>:ACPower:
ALTernate<1|2>
0 to 100 DB,
0 to 100 DB
compatible to
CALCulate<1|2>:
LIMit<1...8>:ACPower:
ALTernate<1|2>
[:RELative] of R&S ESU
not available for FSET
R&S
ESU
CALCulate<1|2>:LIMit<1...8>:ACPower:
ALTernate<1|2>:ABSolute
-200 to 200 DBM,
-200 to 200 DBM
new function for
R&S ESU
R&S
ESU
CALCulate<1|2>:LIMit<1...8>:ACPower:
ALTernate<1|2>:ABSolute:STATe
ON | OFF new function for
R&S ESU
R&S
ESU
FSE CALCulate<1|2>:LIMit<1...8>:ACPower:
ALTernate<1|2>:RESult?
FSE CALCulate<1|2>:LIMit<1...8>:ACPower:
ALTernate<1|2>:STATe
ON | OFF compatible to
CALCulate<1|2>:
LIMit<1...8>:ACPower:
ALTernate<1|2>
[:RELative]:STATe of
R&S ESU
not available for FSET
R&S
ESU
CALCulate<1|2>:LIMit<1...8>:ACPower:
ALTernate<1|2>[:RELative]
0 to 100 DB,
0 to 100 DB
compatible to
CALCulate<1|2>:
LIMit<1...8>:ACPower:
ALTernate<1|2> of FSE
R&S
ESU
CALCulate<1|2>:LIMit<1...8>:ACPower:
ALTernate<1|2>[:RELative]:STATe
ON | OFF compatible to
CALCulate<1|2>:
LIMit<1...8>:ACPower:
ALTernate<1|2>: STATe
of FSE
R&S
ESU
FSE CALCulate<1|2>:LIMit<1...8>:ACPower[:STATe] ON | OFF
Devices Command (Sheet 5 of 47) Parameter Notes