R&S ESU Series - Page 751

R&S ESU Remote Control – Description of Commands
Differences in GPIB Behavior between the FSP and the FSE Families of Instruments
6.312 Operating Manual 1302.6163.12 - 03
FSE HCOPy:ITEM:WINDow<1|2>:TRACe:
CAINcrement
ON | OFF not available for
R&S ESU
R&S
ESU
FSE HCOPy:ITEM:WINDow<1|2>:TRACe:STATe ON | OFF
FSE HCOPy:PAGE:DIMensions:FULL not available for
R&S ESU
FSE HCOPy:PAGE:DIMensions:QUADrant<1...4> not available for
R&S ESU
R&S
ESU
FSE HCOPy:PAGE:ORIentation<1|2> LANDscape | PORTrait
R&S
ESU
FSE HCOPy[:IMMediate]
FSET/
ESIB
HOLD not available for
R&S ESU
R&S
ESU
FSE INITiate<1|2>:CONMeas ON | OFF
R&S
ESU
FSE INITiate<1|2>:CONTinuous ON | OFF
R&S
ESU
FSE INITiate<1|2>:DISPlay ON | OFF
R&S
ESU
FSE INITiate<1|2>[:IMMediate]
FSET INPut:PRESelection:CATalog? not available for
R&S ESU
FSET INPut:PRESelection:USET:NAME 'name of user defined
preselector set (to edit
existing set or to create
new set)'
not available for
R&S ESU
FSET INPut:PRESelection:USET:CLEar not available for
R&S ESU
FSET INPut:PRESelection:USET:COMMent 'comment for
preselector-set'
not available for
R&S ESU
FSET INPut:PRESelection:USET:LRANge[:DATA] <numeric_value>,
<numeric_value>,
<numeric_value>
not available for
R&S ESU
FSET INPut:PRESelection:USET:MRANge[:DATA] <numeric_value>,
<numeric_value>,
<numeric_value>
not available for
R&S ESU
R&S
ESU
FSE INPut<1|2>:ATTenuation 0 to 70dB
FSET INPut<1|2>:ATTenuation 0 to 70 | 80dB 80 dB not available for
R&S ESU
R&S
ESU
FSE INPut<1|2>:ATTenuation:AUTO ON | OFF
Devices Command (Sheet 24 of 47) Parameter Notes