R&S ESU Series - Page 754

Operating Manual 1302.6163.12 - 03 6.315
R&S ESU Remote Control – Description of Commands
Differences in GPIB Behavior between the FSP and the FSE Families of Instruments
FSE/
FSIQ
INSTrument<1|2>[:SELect] SANalyzer | DDEMod |
ADEMod | BGSM |
MGSM
5 parameters are
available.
ESIB INSTrument<1|2>[:SELect] RECeiver | SANalyzer |
DDEMod | ADEMod
4 parameters are
available.
FSET INSTrument<1|2>[:SELect] ANalyzer | DDEMod |
RECeiver
3 parameters are
available.
R&S
ESU
FSE MMEMory:CATalog? string
R&S
ESU
FSE MMEMory:CDIRectory directory name
R&S
ESU
FSE MMEMory:CLear:ALL
R&S
ESU
FSE MMEMory:CLear:STATe 1,path
R&S
ESU
FSE MMEMory:COMMent <string>
R&S
ESU
FSE MMEMory:COPY path\file, path\file
R&S
ESU
FSE MMEMory:DATA filename[, <block data>]
R&S
ESU
FSE MMEMory:DELete path\filename
R&S
ESU
FSE MMEMory:LOAD:AUTO 1,path
R&S
ESU
FSE MMEMory:LOAD:STATe 1,path
R&S
ESU
FSE MMEMory:MDIRectory path
R&S
ESU
FSE MMEMory:MOVE path
R&S
ESU
FSE MMEMory:MSIS 'F:' | 'D:' R&S ESU:
valid drives are F: and D:
FSE:
valid drives are A: and C:
R&S
ESU
FSE MMEMory:NAME path\filename
R&S
ESU
FSE MMEMory:RDIRectory directory
R&S
ESU
FSE MMEMory:SELect[:ITEM]:ALL
FSE MMEMory:SELect[:ITEM]:CSETup ON | OFF not available for
R&S ESU (default
setting on the R&S ESU)
FSE MMEMory:SELect[:ITEM]:CVL:ALL ON | OFF not available for
R&S ESU and FSET
Devices Command (Sheet 27 of 47) Parameter Notes