R&S ESU Series - Page 756

Operating Manual 1302.6163.12 - 03 6.317
R&S ESU Remote Control – Description of Commands
Differences in GPIB Behavior between the FSP and the FSE Families of Instruments
FSE READ:BURSt:FERRor:MAXimum? not available for
R&S ESU and FSET
FSE READ:BURSt:FERRor:STATus? not available for
R&S ESU and FSET
FSE READ:BURSt:PERRor:PEAK:AVERage? not available for
R&S ESU and FSET
FSE READ:BURSt:PERRor:PEAK:MAXimum? not available for
R&S ESU and FSET
FSE READ:BURSt:PERRor:PEAK:STATus? not available for
R&S ESU and FSET
FSE READ:BURSt:PERRor:RMS:AVERage? not available for
R&S ESU and FSET
FSE READ:BURSt:PERRor:RMS:MAXimum? not available for
R&S ESU and FSET
FSE READ:BURSt:PERRor:RMS:STATus? not available for
R&S ESU and FSET
FSE READ:BURSt:POWer:DYNamic? not available for
R&S ESU and FSET
FSE READ:BURSt:POWer:LEVel? not available for
R&S ESU and FSET
FSE READ:BURSt:POWer:STATic? not available for
R&S ESU and FSET
FSE READ:BURSt:POWer? not available for
R&S ESU and FSET
FSE READ:BURSt:REFerence[:IMMediate?] not available for
R&S ESU and FSET
FSE READ:SPECtrum:MODulation[:ALL]? not available for
R&S ESU and FSET
FSE READ:SPECtrum:SWITching[:ALL]? not available for
R&S ESU and FSET
FSE READ:SPURious:STEP? not available for
R&S ESU and FSET
FSE READ:SPURious[:ALL]? not available for
R&S ESU and FSET
FSE [SENSe<1|2>:]ADEMod:AF:COUPling AC | DC not available for
R&S ESU and FSET
FSE [SENSe<1|2>:]ADEMod:RTIMe ON | OFF not available for
R&S ESU and FSET
FSE [SENSe<1|2>:]ADEMod:SBANd NORMal | INVerse not available for
R&S ESU and FSET
FSE [SENSe<1|2>:]ADEMod:SQUelch:LEVel 30 to 150 dBm not available for
R&S ESU and FSET
FSE [SENSe<1|2>:]ADEMod:SQUelch[:STATe] ON | OFF not available for
R&S ESU and FSET
FSET [SENSe<1|2>:]AM:RANGe[:UPPer] 3PCT | 10 PCT | 100PCT not available for
R&S ESU
Devices Command (Sheet 29 of 47) Parameter Notes