5 | Intelligent cooking - iCookingSuite
30 / 92 Operating instructions
Tilt the pan fully
You have deep-fried food in the pan and did not raise the pan fully to drain the frying oil.
1. Tilt the pan fully [}19].
2. Remove all the fat or oil.
3. Then lower the pan down again fully [}19].
Lower pan completely
You have selected a manual mode or an intelligent cooking process and the pan is not fully lowered.
1. Lower the pan fully [}19].
Open pan lid fully
You have selected a manual mode or an intelligent cooking process and the pan lid is not fully open.
1. Open the pan lid fully [}17].
Close pan drain valve
You have selected a manual mode or an intelligent cooking process and the pan drain valve is open.
1. Close the pan drain valve [}19].
Close pan drain valve immediately
You have deep-fried food in the pan and have opened the pan drain valve even though you have not tilted the pan
fully to drain the frying oil.
1. Close the pan drain valve immediately [}19].
2. Tilt the pan fully [}19].
3. Remove all the fat or oil.
4. Then lower the pan down again fully [}19].
Raise basket
You have selected a manual mode or an intelligent cooking process and the basket is still lowered from a previous
cooking operation.
1. Press the button
> The basket will be raised fully.
Pan temperature too high
You wish to fill the pan using the automatic water refill, but the function is off. The pan temperature is too high.
1. Leave the pan to cool down by itself. Do not try to cool it quickly using cold water or ice. Once the pan has
cooled, you can use the automatic water filling function again.
Automatic water filling inactive
This symbol is displayed in the following cases:
n
The pan lid is not fully open.
Open the pan lid fully [}17].
n
The pan is not fully lowered.
Lower the pan fully [}19].
n
You are deep-frying food.
The water inlet will only be active again once you are no longer deep-frying food and have removed all the
frying oil or fat.
n
You did not fully tilt the pan after deep-frying food.
Tilt the pan fully [}19].
To Next Page
Loading...
