Rational iVario L - Managing Programmes and Shopping Carts; Programme the Shopping Cart; Edit and Delete Programmes

9 | Programming mode
58 / 92 Operating instructions
> Depending on the selected cooking process, the adjustable cooking parameters and additional functions will
be displayed. The standard settings of the cooking process are marked with the following symbol:
3. Adjust the cooking parameters as required.
4. To save your changes, press the button:
> The individual cooking steps will be displayed again.
5. To give the cooking process a name, press the button:
6. Assign a name.
7. To save the cooking process, press the button:
>> The cooking path is shown in the programme list.
9.3 Programme the shopping cart
1. Press the button in the menu bar:
2. Press the button + New element
3. Press the button
4. To add intelligent cooking paths to the shopping cart, press the button:
> All intelligent cooking paths are displayed.
5. Scroll through the list and press the desired cooking path.
> The cooking path is highlighted with and added to the shopping cart.
6. To add programmes that are already saved to the shopping cart, press the button:
> All programmes are displayed.
7. Scroll through the list and press the desired programme.
> The cooking path is highlighted with and added to the shopping cart.
8. To check the shopping cart, press the button:
> All chosen intelligent cooking paths and programmes are displayed.
9. To delete an item from the shopping cart, press the button:
10. To give the shopping cart a name, press the button:
11. Assign a name.
12. To save the shopping cart, press the button:
>> The shopping cart is displayed in the programme list.
9.4 Edit and delete programmes
a You have programmed manual programme [}55], intelligent cooking paths [}56] or shopping carts [}58].
1. To edit a programme, press the button:
You can choose from the following editing options:
n
Edit item
n
Duplicate item
n
Delete item
9.5 Start programmes and shopping carts
Manual programmes
1. To start a manual programme, press the desired programme.
> The programme starts immediately. All cooking steps are displayed.
2. To send a manual programme to iZoneControl, press the button: