Rational iVario L - Data Management and Cuisine Settings; Secondary Country Cuisine Setting; Data Management Overview; Exporting HACCP Data

11 | Settings
Operating instructions 65 / 92
11.6.2 Secondary country cuisine
You can add an additional country cuisine to the primary country cuisine. This allows you to prepare typical dishes
from 2 countries at the same time. This is an advantage, for example, if your restaurant wants to offer a special
weekly menu with another country cuisine.
1. Press the button Secondary country cuisine
2. Scroll through the list and select the desired secondary country cuisine.
>> The country cuisine is immediately adopted. In the iCookingSuite, the additional intelligent cooking paths of
the secondary country cuisine are displayed and marked with . The settings of the cooking parameters are
still influenced by the primary country cuisine [}64].
11.7 Data management
Please note that the data management functions are only available if you connect a USB flash drive to the unit.
1. Press the button
2. Press the button Data management
You can adjust the following settings:
n
Export HACCP data [}65]
n
Export error statistics log [}67]
n
Export and import programs [}65]
n
Export and import profiles [}66]
n
Export and import basic unit settings [}66]
11.7.1 Export HACCP data
Here you can export all HACCP data recorded by the unit to a USB stick. You can also have the HACCP data
automatically transferred to ConnectedCooking.
a You have connected a USB flash drive with the unit.
1. Press the button Copy HACCP log to a USB stick
>> The HACCP data is saved on the USB stick.
11.7.2 Export and import programmes
Here you can export and import all the programs you have created.
Export programs
a You have created programs in the programming mode.
a You have connected a USB flash drive to the unit.
1. Press the button Export programs
>> The saved programs are saved on the USB flash drive.
Import programs
1. Connect a USB flash drive containing the exported programs to the unit.
2. Press the button Import programs
>> The saved programs are imported and displayed in programming mode.
11.7.3 Delete all programs
Here you can delete all programs you have created.
1. Press the buttonDelete all programs
> You will be asked if you really want to delete the programs.
2. To confirm the action, press the button: