Rational iVario Pro 2-S - Personal Protective Equipment

3 | Product description
12 / 52 80.06.415_iVario2-XS-iVarioPro2-S_IM_en_US
3 Product description
3.1 Device description
NOTE
Never seal or pipe the safety overflow
Do not reduce the cross-section of the safety overflow.
The safety overflow but be accessible and clear at all times. It is used for
ventilation and as a drain in the event of blockages.
The connections for the installation are located on the rear side of the device
behind the center cover:
66
77
44
33
22
11
55
1 Waste water connection 5 PG screw fittings for optional con-
nection
2 Water connection 6 Cable gland with cable for electri-
cal connection
3 Ethernet network connection 7 Safety overflow with sieve (no
connection)
4 PG screw fittings for optional con-
nection