5 | Setup
28 / 52 80.06.415_iVario2-XS-iVarioPro2-S_IM_en_US
a The stand is aligned horizontally.
a The minimum distances are observed.
1. Position the device feet on the bolt of the stand.
>> The device is positioned on the stand and secured against slipping.
5.4 Fixing the device in place
The manufacturer recommends fixing the device to the installation surface.
The kit for fixing the device, including special adhesive, screws and dowels, is
not included in the scope of supply for the device and can be ordered sepa-
rately from the manufacturer under item number 60.72.905.
To Next Page
Loading...
