9 | Waste water connection
80.06.415_iVario2-XS-iVarioPro2-S_IM_en_US 45 / 52
9.2 Connecting the wastewater drain
n
The wastewater connection is located on the rear side of the device.
n
Diameter on the device drain: DN 40 mm
Installing the wastewater connection with drain to the rear side of the device
a The drain pipe is designed for a DN 40 mm device drain.
a The drain pipe corresponds at least to type PP and is steam temperature re-
sistant.
1. Use a 90° elbow as the first pipe piece for the drain pipe.
2. Avoid unnecessary 90° angles in the pipework to ensure optimal water
drainage.
3. Connect the drain pipe to the side or leading downwards.
To Next Page
Loading...
